- Remove the paper gasket (1) and the
2 locating pins (2).
- Remove the starter ring (3).
- Remove the starter dog (4).
- Using pin spanner ref. 752237 immobilise
the overrunning clutch (5).
- Using tool P/N 800673, remove the notched
nut and the washer of the overruning clutch.
Tightening torque: 90 Nm.
The notched nut of the overrunning
clutch has a left-hand thread.
- Remove the overrunning clutch.
Checking the overrunning clutch
- Rotate the overrunning clutch by hand:
• It must rotate in direction (A).
• It must be block in direction (B).
- If it doesn't, replace the overrunning clutch.
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
MAGNETO FLYWHEEL/FREEWHEEL
4
3
1
752237
B
A
2
2
5
800673
27