Unitech MS912 Quick Start Manual

MS912
Quick Start Guide
The Unitech MS912 Pocket Scanner
Installation Instructions & Popular Configuration Settings
Enable Pairing on MS912
Step 2:
Enable Simple Pairing
Scan here to begin Simple Pairing.
Pincode Start
Step 6:
Pincode Start
Scan here to indicate the beginning of the pincode sequence.
SETUP AND INSTALLATION
The following steps will walk you through the installation process.
Enable Bluetooth on host
Step 3:
Go to your device (phone/tablet/computer) settings and turn on
the Bluetooth function.
The MS912 will appear on your device as
"Wireless Scanner," "Wireless Keyboard," or simply "Wireless"
Select/Press "Wireless Scanner"
If you have Bluetooth 2.1, "Wireless Scanner" will now appear
as paired. Your device is now paired with the MS912
*If your device does not pair automatically continue to
step 4*
Numeric Barcodes
Step 7:
Scan the pincode sequence provided by your device using these barcodes.
Connect and CHarge
Step 1:
Flip the rubber cover up to expose the mini USB port on the scanner. Insert the mini USB cable into the port on the scanner and into the port on the
host computer. Charge for at least 5 hours.
HID Mode
Step 4:
Bluetooth Mode: HID
Scan here to continue the pairing process between your host device
and the MS912.
Finish Pairing
Step 5:
The MS912 will appear on your device as
"Wireless Scanner" or simply "Wireless"
Select/Press "Wireless Scanner"
Your device is now paired with the MS912. Skip to "Test and
Finish"
*If prompted to enter a pincode to finish the pairing
process, proceed to steps 6-9*
Finish Pairing
Step 8: Step 8:
Enter
Scan here to indicate the end of the pincode sequence.