Communication Settings - Omega OM-DAQXL-1 Series User Manual

Communication Settings (if applicable)
If you purchased a model 3 or 4 data logger, your tool bar will have a communications
settings button. The Comm settings screen is where you can configure the Ethernet or
optional WiFi communication settings.
2
Figure 3-38 Comm Settings – Ethernet
1. Connection Selection
This button is used to select the network adapter. The settings for the currently
selected network adapter will be shown below.
2. DHCP
This checkbox is used to enable or disable DHCP for the currently selected
network adapter. DHCP Dynamic Host Configuration Protocol (DHCP) is a
client/server protocol that automatically provides an Internet Protocol (IP) host
with its IP address and other related configuration information such as the subnet
mask and default gateway.
3. IP Address
If DHCP is checked the DHCP assigned IP address is shown for the selected
adapter. If DHCP is not checked, a static IP address can be entered using the
keypad.
4. Subnet Mask
If DHCP is checked the DHCP assigned subnet mask is shown for the selected
adapter. If DHCP is not checked, a subnet mask can be entered using the keypad.
5. Gateway
6. If DHCP is checked the DHCP assigned gateway IP is shown for the selected
adapter. If DHCP is not checked, a gateway IP can be entered using the keypad.
7. Update
6.
After configuring the settings, hit the update button to apply the settings to the
selected network adapter.
1
3
4
5
6
3
Standalone Operation
3-32