2.3.4 Right Side
The right side of the data logger features the USB host and device connectors
as well as the shield ground terminal. The shield ground terminal may be
connected to earth ground to minimize sensor noise pickup. In addition the
stylus is stored in a slot on this side of the device. For -EW models, the Ethernet
Port is present on the right side of the data logger.
SHELL GROUND
TERMINAL
USB DEVICE PORT
Figure 2-5 OM-DAQXL Right Side View
2.3.5 Top
The top of the data logger provides analog input terminal blocks for either 8
or 16 channels depending on the model. The terminal blocks are designed to
accommodate wire between sizes 26 -14 AWG. See Section 2.6 for information on
how to connect sensors.
Figure 2-6 OM-DAQXL Top View
2.3.6 Bottom
Figure 2-7 OM-DAQXL Bottom View
USB HOST PORT
ETHERNET PORT
2
Hardware
2-4