Switch The Device On And Off; Charge The Battery - Nokia E72 User Manual

Hide thumbs Also See for E72:
Table of Contents

Advertisement

Switch the device on
and off
To switch on the device:
1. Press and hold the power key.
2. If the device asks for a PIN code or lock code,
enter it, and select OK. The preset lock code
is 12345. If you forget the code and your
device is locked, your device will require
service and additional charges may apply. For
more information, contact a Nokia Care point or your
device dealer.
To switch off the device, press the power key briefly, and
select
Switch
off!.

Charge the battery

Your battery has been partially charged at the factory. If
the device indicates a low charge, do the following:
1. Connect the charger to a wall outlet.
2. Connect the charger plug to the device.
Cyan
Cyan
2009-06-25 13:13:44 P3657 user guide publication 3
3. When the device indicates a full charge, disconnect the
charger from the device, then from the wall outlet.
You do not need to charge the battery for a specific length
of time, and you can use the device while it is charging. If
the battery is completely discharged, it may take several
minutes before the charging indicator appears on the
display or before any calls can be made.
Charging with the USB data cable
Charging with the USB data cable is slower than charging
with the charger. Charging with the USB data cable may
not work if you use a USB hub. USB hubs may be
incompatible for charging a USB device.
When the USB data cable is connected, you can transfer
data at the same time as charging.
1. Connect a compatible USB device to your device using
a compatible USB data cable.
Depending on the type of the device that is used for
charging, it may take a while for charging to start.
2. If the device is switched on, select from the available
USB modes.
Magenta
Magenta
Yellow
Yellow
Black
Black
15

Advertisement

Table of Contents
loading

Table of Contents