KTM 350 EXC-F EU 2018 Owner's Manual page 141

Main work
–
Place a suitable container under the engine.
–
Remove oil drain plug
Info
Do not remove screws
K00567-10
–
Remove screw plug
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing surfaces.
K00568-10
–
Position oil screen
–
Position the pin wrench through the drilled hole of the screw
plug in the opposite section of the engine case.
–
Push the oil screen all the way into the engine case.
K00569-10
–
Mount and tighten screw plug
Guideline
Screw plug, oil screen
–
Mount and tighten oil drain plug
new seal ring.
Guideline
Oil drain plug with
magnet
K00570-10
–
Remove screws
K00571-10
18 SERVICE WORK ON THE ENGINE
1
with the magnet and seal ring.
2 .
3 4
with oil screen and the O-rings.
4
with the O-rings on a pin wrench.
3 with the O-ring.
M20x1.5 15 Nm (11.1 lbf ft)
1 with the magnet and a
M12x1.5 20 Nm (14.8 lbf ft)
5 . Remove the oil filter cover with the O-ring.
139