Advertisement
Operation Menu
1. Operation Panel
[SEL] key
[FUNC1]/[FUNC2]/[FUNC3] key
JOG key [←] [→] [↑] [↓]
[END/POWER] key
[ENTER] key
2. Local, Remote, and Function Key
【Local mode】
【Remote mode】
Resolution 360 /540 /720 /1440DPI
Number of passes
Scan direction Uni : Unidirectional Bi : Bidirectional
Scanning speed Std : Standard speed Hi : Double speed
Data type
Vd : Variable data Nd : Normal data
The length of media printed
© 2014 MIMAKI ENGINEERING CO.,LTD.
Local mode is the mode where the printer is ready
to perform printing.
All the keys are enabled.
The machine can receive data from a computer, but
it does not perform printing.
Prints received data in remote mode.
【Function key】
The dedicated key including [FUNCTION] or the frequently used menu such as
[TEST PRINT] or [HEATER] are registered in [FUNC1] to [FUNC3].
You can make a switch by pressing the [SEL] key.
Icon
It displays "MENU" that allows you to setup each PRINT/CUT function.
It displays maintenance functions for performing test print or cleaning, etc.
It switches back and forth between Local and Remote, and starts Print/Cut in Remote mode.
It displays adjusting functions such as media feed adjustment or ink drop position adjustment
when printing.
It allows you to setup the heater temperature when printing.
It clears print data or cut data in the machine.
3. Menu Contents
To see the details in [Print Function Menu][Cut Function Menu], refer to your Operation manual.
You can setup feed adjustment, drop position adjustment, heater settings, or other
SETUP
print settings.
You can setup station maintenance, auto maintenance, or other relevant
MAINTENANCE
maintenance.
Print
You can setup FEED-CHECK, AUTOPOWER OFF, or other functions to utilize the
Function
MACHINE SETUP
machine.
Menu
NOZZLE CHECK
You can change the settings on nozzle dropout detecting function or the related.
INFORMATION
You can check operation status, version, or other device information.
Description
Menu Contents
D202818-10-04122014_GSS
Advertisement
