Dell Wyse 3000 Installation And Setup Manual page 7

avoid causing IP address conflicts with
other devices on your local network.
6. Extract the DHCP Server package
downloaded earlier, and run the
"dhcpwiz" executable. Follow the steps in
the wizard to get to the "Network
Interface Cards" screen.
7.
Select "Local Area Connection", and
confirm that its DHCP setting is disabled
by default.
8. On the next screen, check "HTTP (Web
Server)" and leave the others unchecked.
Click "Next".
ThingWorx EMS Setup Guide
for the Dell WYSE 3000
Page 2-4