Dell Wyse 3000 Installation And Setup Manual page 16

7. Click "Properties", and then select
"Edit" if necessary to re-enter edit
mode.
Next, click "Add My Property", and
create a new STRING property named
"testValue".
Click "Done".
8. On the Properties page, click "Manage
Bindings", and then click the "Remote"
tab at the top left of the new window.
9. Click and drag to add "testScriptDemo"
remote property to the "testValue"
property, and then click Done.
Note: If you can't see the remote things here, verify that the
"wsems" and "luaScriptResource" are both running on the
Dell device, and that the connection is established properly.
ThingWorx EMS Setup Guide
for the Dell WYSE 3000
Page 3-13