4.
On the ThingWorx platform on the host
computer, navigate to the ThingWorx
monitor and go to Remote Things again.
Here, you should see two unbound
things listed:
5.
In ThingWorx, create a new Thing
entity named "testThing", and select
"RemoteThing" as the implementing
Thing Template.
6.
On the General Information page for
this new Thing, click "Browse" next to
its identifier field, and select "testit"
from the available choices.
Save the testThing entity when
finished.
ThingWorx EMS Setup Guide
for the Dell WYSE 3000
Page 3-12