Dell Wyse 3000 Installation And Setup Manual page 6

3. Right-Click on "Local Area Connection",
and choose "Properties".
4. Select "Internet Protocol Version 4", and
then click "Properties". Click the button
for "Use the following IP address", and set
a private IP address that starts with
"192.168...". Subnet Mask may be left as
255.255.255.0
5. Connect the Dell Wyse 3000 device to your
computer with an Ethernet cable. Note:
From here on out, you may wish to disable
any connection to another network to
ThingWorx EMS Setup Guide
for the Dell WYSE 3000
Page 2-3