Advertisement
RNX-G100 / RNX-G200 / RNX-G300(E)
3.2
PCI Adapter - RNX-G300(E)
Open your PC case and locate an available PCI on the motherboard.
Slide the PCI Adapter into the PCI slot. Make sure that all of its pins are touching the slot's
contacts. You may have to apply a bit of pressure to slide the adapter all the way in. after the
adapter is firmly in place, secure its fastening tab to your PC's chassis with a mounting screw.
Then close your PC.
Attach the external antenna to the adapter's antenna port.
Power on the PC.
If the Found New Hardware Wizard displays, choose install the software automatically
(Recommended), and click Next button. The driver will be installed automatically.
3.3
USB Adapter - RNX-G100
Power on your PC, let the operating system boot up completely, and login as needed.
Hold the adapter and insert it into a USB slot.
If the Found New Hardware Wizard displays, choose install the software automatically
(Recommended), and click Next button. The driver will be installed automatically.
You have now completed the driver and hardware installation for the Adapter
4
Configuration your wireless adapter
The Wireless Client Configuration Utility screen will appear automatically.
Figure 3-3
Figure 3-4
5
User Manual
Advertisement
