Electrical Specifications; Recommendations; Electrical Wiring Diagram; Extension Cord Chart - Sawmaster T7 Owner's Manual

Electrical Specifications
Power
Volts
Amps
Motor RPM
Cycle
Phase

RECOMMENDATIONS

• It is recommended that a 15 amp circuit be used while
operating this saw. This will prevent any loss of power
or interruption.
• Always plug saw as close as possible to the power
source while operating. This will allow you to receive
optimum electricity.

ELECTRICAL WIRING DIAGRAM

T7
1 HP
115 V
8.5 A
6000 RPM
60 Hz
1
Green
Wiring Box
Power Outlet for Water Pump
Black
White
WARNING:
To avoid permanent motor damage you must use the cor-
rect extension cord. Never use more than one extension
at a time. Follow the chart below for proper size.

EXTENSION CORD CHART

Wire Gauge
No. 12
No. 10
No. 8
Switch
Length of Cord
25'
50'
75'
Motor
Black
White
14