To Set The Alarm In Wood, Drywall, Scan Mode; Main Menu Options - Delmhorst QuickNav Owner's Manual

3. After the alarm is turned on, use the
decrease alarm value.
4. After you have selected the alarm value, use the ò key to highlight EXIT. Press the
center HOLD (SELECT) key to return to MAIN MENU.
5. The chosen alarm value will be displayed on the WOOD, DRYWALL, or SCAN mode
screen and an audible alarm will sound if that value is reached.
Note: Default alarm settings are: WOOD - 15% DRYWALL – 1%, SCAN - 300.

MAIN MENU OPTIONS:

• METRIC/IMPERIAL:
This option will toggle between Imperial units of measure and Metric units of measure
when the meter is in RH/T Mode. Pressing SELECT key on this option when displayed as
METRIC will change the units used to metric. Pressing the SELECT key on this option
when displayed as IMPERIAL will change the units used to imperial.
• OFF:
This menu option will power down the meter.
ð
key to increase the alarm value, and the ï key to
Copyright © 2011, Delmhorst Instrument Co.
Page 8 of 17