xCraft X2 Geo Operator's Manual page 26

NOTICES AND WARNINGS
Avoid water exposure to all electronic components, parts, etc. not specifically designed and protected for use
in water. Moisture causes damage to electronic components and parts.
Never place any portion of the aircraft or any related accessories, components or parts in your mouth as doing
so could cause serious injury or even death.
Always keep chemicals, small parts and electronic components out of the reach of children.
Carefully follow the instructions and warnings included with this aircraft and any related accessories,
components or parts (including, but not limited to, chargers, rechargeable batteries, etc.).
Individual Parts
Transmitter
Ensure the transmitters batteries are full before each flight.
If the transmitter is left on for more than 5 minutes it will sound an alarm. Execute some action, or power it off.
Repair or replace the transmitter if damaged.
Compass
To avoid possible injury or damage, observe the following rules:
Land immediately when severe drifting occurs in flight, i.e., the aircraft does NOT fly in straight lines.
Ensure the compass is calibrated before every flight. Failure to calibrate may lead to poor flight performance or a crash.
DO NOT attempt to calibrate your compass where there is a chance of strong magnetic interference. This
includes areas where there are massive metal objects, parking structures, steel reinforcements underground,
or under bridges.
DO NOT carry ferromagnetic materials with you during calibration, such as keys or mobile phones.
26