Updating Firmware - xCraft X2 Geo Operator's Manual

Open QGroundControl.
q
Click .
w
w
Click
e
Plug in vehicle via USB cable
r
Check "advanced settings" box (see right)
t
In the dropdown click custom firmware file. Click 'OK'
y
when selected.
In popup window select the most up to date firmware file
u
provided by xCraft. Contact xCraft or authorized dealer for
the most recent firmware.
Leave USB connected until "upgrade completed" mes-
i
sage appears; confirmation tone is heard and vehicle fully
reboots.
After updating firmware calibrate all sensors. (see
i
calibrating your x2 Geo).

UPDATING FIRMWARE

.
e
t
y
r
21