Flying The Autonomous Mission - xCraft X2 Geo Operator's Manual

Flying the Autonomous Mission

Place the vehicle on a flat and stable surface ensuring no overhead obstructions above
q
or within 20 meters around vehicle.
Insure vehicle has a 3D GPS fix (see diagram 08 for status indications).
w
Deactivate safety by pressing and holding the safety switch until the safety switch
e
turns solid red.
Arm the vehicle by moving the transmitter's left stick all the way down and to
r
the right. Hold until motors begin to spin.
Begin mission by flipping the mode switch down to the mission position.
t
The vehicle will perform the mission most recently uploaded. Watch the vehicle's flight
y
path carefully ensuring that it performs the mission properly. Also ensure that
the vehicle lands on a clear flat and stable surface. Be ready to assume manual
control by switching mode switch to stabilize or hold in the event the above conditions
are not met.
After the vehicle sucessfully lands the motors will disarm after 2 seconds.
u
Approach vehicle. Press and hold safety switch until light turns to a flashing red to
i
activate safety. It is now safe to retrieve vehicle.
Switching flight mode at any time will pause current mission and return to the selected mode.
FLYING THE X2 GEO
FLYING THE AUTONOMOUS MISSION
IMPORTANT!
16