Notices & Warnings - xCraft X2 Geo Operator's Manual

Table of Contents

Advertisement

NOTICES AND WARNINGS
Important Note: All safety precautions and warnings, instructions, warranties and other collateral
information is subject to change at the sole discretion of xCraft Enterprises. For the most up-to-date
information please contact xCraft Support. The following special language terms are used throughout the
product literature to indicate various levels of potential harm when operating this product:
Notice: Procedures, which if not properly followed, create a possibility of property damage and/or little to no
possibility of injury.
Caution: Procedures, which if not properly followed, create the probability of property damage and/or a
possibility of serious injury.
Warning: Procedures, which if not properly followed, create the probability of property damage, collateral
damage and/or serious injury or create a high probability of superficial injury.
Warning: Read the ENTIRE Operation Manual to become familiar with the features of the product before
operating. Failure to operate the product correctly can result in damage to the product, property and/or cause
serious injury.
Warning: This is a sophisticated product. It must be operated with caution and common sense, and requires
some basic mechanical ability. Failure to operate this product in a safe and responsible manner could result
in damage to the product, property and/or cause serious injury. This product is not intended for use by
children without direct adult supervision. Do not use with incompatible components or alter this product
in any way outside of the instructions provided by xCraft. The Operation Manual contains instructions for
safety, operation, and maintenance. It is essential to read and follow all the instructions and warnings prior to
assembly, setup and/or use in order to operate the product correctly and avoid damage and/or serious injury.
Age recommendation: Not for children under 18 years. This is not a toy.
General Safety precautions and Warnings:
Failure to use this product in the intended manner as described in the Operation Manual can result in damage
to the product, property and/or cause serious injury. A Radio Controlled (RC) multirotor aircraft, APV platform,
vehicle, etc. is not a toy! If misused it can cause serious bodily harm and damage to property.
Warning: As the user of this product you are solely and wholly responsible for operating it in a manner that
does not endanger yourself and others or result n damage to the product or the property of others.
Keep your hands, face and other parts of your body away from the spinning propellers and other moving parts
at all times. Keep items that could impact or become entangled away from the propellers including debris,
parts, tools, loose clothing, etc. Always operate your aircraft in open areas that are free from people. Vehicles
and other obstructions. Never fly near or above crowds, airports or buildings.
To ensure proper operation and safe flight performance never attempt to operate your aircraft nearby
buildings or other obstructions that do not offer a clear view of the sky and can restrict GPS reception.
Do not attempt to operate your aircraft in areas with potential magnetic and/or radio interference including
areas nearby broadcast towers, power transmission stations, high voltage power lines, etc.
Always keep a safe distance in all directions around your aircraft to avoid collisions and/or injury. This aircraft
is controlled by a radio signal subject to interference from many source outside your control. Interference can
cause momentary loss of control.
Do not attempt to operate your aircraft with any worn and/or damage components, parts, etc. (including, but
not limited to, damaged propellers, old batteries, etc.)
Never operate your aircraft in poor or severe weather conditions including heavy winds, precipitation,
lightning, etc.
Always operate your aircraft starting with a fully charged battery.
Always keep the aircraft in clear line of sight and under control, and keep the transmitter powered on while
the aircraft is powered on.
Always move the throttle control stick down fully and disarm the motors in the event the propellers come into
contact with any objects.
Always allow components and parts to cool after use before touching them and flying again.
Always remove batteries after use and store/transport them per the corresponding guidelines.
25

Advertisement

Table of Contents
loading

Related Products for xCraft X2 Geo

Table of Contents