Appliance - Beko CWB 6731 B User Manual

3 Installation of Your Appliance
• Screw the 150 mm flue adaptor to the appli-
ance. The return damper shall be installed to
the 150 mm flue adaptor. (Do not use a damper
if carbon filter shall be used without flue.
• 120 mm flue adaptor may be used if required.
• Flue and pipe connections shall ensure that
they will not be displaced when the product
operates.
Tape used for flue connection areas shall be of the
non-flammable, aluminum type.
12 / 114 EN
• Place the flue plates as shown in the figure.
• Plug the appliance properly. Close the fuse sup-
plying the plug.
Screw and fix the flue plates to the brackets on
the wall.
Remove protective films, if any.
Hood / User Manual