Beko CWB 6441 Instruction Manual
Range hood
Hide thumbs
Also See for CWB 6441:
- Instruction manual (53 pages) ,
- Instruction manual (72 pages) ,
- User manual (25 pages)
Related Manuals for Beko CWB 6441
Summary of Contents for Beko CWB 6441
- Page 1 Instructions Manual CWB 6441 - CWB 9441...
- Page 2 INDEX WARNINGS - COMPONENTS .............................. 3 INSTALLATION..................................4 USE - MAINTENANCE ................................5...
-
Page 3: Warnings - Components
WARNINGS - COMPONENTS WARNINGS This appliance has been designed for use as either an EXTRACTION (ducting to the outside) or RECIRCULATION (filtering) hood. The measurements contained on the drawings in this booklet refer to two models of cooker hood. Therefore, it is essential that you refer to the cor- rect drawing when taking measurements for installation. -
Page 4: Installation
INSTALLATION The cooker hood must be installed centrally over a cooking appliance. The minimum distance between the cooking surface and the metal grease filters on the underside of the hood must be at least 650mm. To install the hood proceed as follows: 1) Drill six 8mm diameter holes at X1-X2-J and insert the plastic rawl plugs supplied as illus- trated in fig. -
Page 5: Use - Maintenance
USE - MAINTENANCE The cooker hood functions are controlled by a series of slider or push button switches mounted on the front of the hood and control the worktop lighting and fan motor speeds. This cooker hood will not remove steam. 1) SLIDER SWITCHES - A switch controls the worktop lighting - ON/OFF. - Page 10 750 min 1140 max 590 min X X1...
- Page 12 436005827_ver1...