Installation Of Your Appliance - Beko CWB 6731 B User Manual

3

Installation of Your Appliance

Accessories
1 pc of 150 mm
flue adaptor
Flue plate
retaining bracket (lower)
Carbon filter (optional)
1 damper
[09] x 8
(3.9 x 32mm)
[10] x 4
(3.9 x 12mm)
8 / 114 EN
1 pc of 120 mm
flue adaptor
Flue plate retaining
bracket (upper)
1 air deflector
Information required for the
preparation of the installation
place for your hood is given
below.
• *Preparation of the installation place and elec-
tric wiring is the responsibility of the customer.
Attention! Remove the protective film (if any)
on the hood and flue surface after the installation.
The height between the lower
surface of the hood and upper
surface of the stove/oven should not
be less than 65 cm.
Electrical Connection
Manufactured with 2-track power cable, this
device must be connected to the mains by an
electrical switch with at least 3mm clearance
between bipolar contact leads. Have a qualified
electrician to install electric wiring.
Install your product to ensure easy access to
electricity connection (plug, wall outlet) after
installation.
Dimensions are given in mm.
Hood / User Manual