Rosen 410X Owner's Manual page 17

Factory Radio
Mounting Bracket
Factory Radio (1 pair for the left and right sides)
Mounting Screws
(retain)
Pocket
Factory
Trim
Bezel
410X
5. Wiring the 410X
The following pages display wiring diagrams for 410X configu-
rations.
Read the following precautions before wiring your system.
Disconnect the negative battery terminal before making
any wiring connections.
Be particularly careful where you route wires. Keep them
away from the engine, exhaust system, etc. Heat may
damage wires.
If the fuse should blow, make sure all connections are
correct and no wires are damaged before replacing the
fuse. Always use fuses that are the same amperage value
as the original. When replacing a fuse, never let the battery
side touch any metal part or any other wire.
17
410X