2 Remove the clips on the sides of the 410X.
2-Screw
Spring clip
Screwdriver
16
410X
3 Mount the unit to the factory radio brackets, and bolt the
brackets to the dashboard. Reassemble the dash.
Note:
In some cases the factory trim panel may require some slight
DIN sleeve spring clip
trimming, or there may be a slight gap that requires filling.
Screw bracket
Factory
to 410X
Trim
Screws
Factory
Radio
Mounting
Bracket
Dashboard
OEM or
aftermarket
Radio
Factory
trim
bezel
410X in place
of factory pocket, below
radio
Factory Radio
Mounting Bracket
Screw bracket
to 410X
Factory Trim Screws