Bosch B920 User Quick Reference Manual page 2

2 | Turn on (arm) your system
To set All On with a delay, enter your passcode, then [ENTER].
or
Use one of the available commands:
For All On (with delay): [CMD][1]
For All On, Instant: [CMD][1][1]
For Part On, Instant: [CMD][2]
For Part On (with delay): [CMD][3]
or
Use the menus. Begin by pressing [MENU] or by pressing [CMD][8].
For All On: Go to [1] On/Off > [1] All On > [1] All On Delay.
For All On, Instant: Go to [1] On/Off > [1] All On > [2] All On Instant.
For Part On: Go to [1] On/Off > [2] Part On > [1] Part On Delay
For Part On, Instant: Go to [1] On/Off > [2] Part On > [2] Part On Instant.
You can select individual areas to set. Open the All On or Part On menu,
touch [3] to open the Select menu, and then use [NEXT] and [ENTER] to
select On Instant or On Delay and the area to set.
or
Press the [ALL] or [PART] key.
3 | Disarming your system
Enter your passcode.
or
To open the main menu, use [CMD][8].
For Turn Off: Go to [1] On/Off > [3] Off > [1] Off.
For Turn Off Select: Go to [1] On/Off > [3] Off > [2] Off Select. Then use
[NEXT] and [ENTER] to select the area to turn off.
4 | Changeing your passcode
Use [CMD][5][5], then the prompts.
or
To open the main menu, use [CMD][8].
Go to [4] Users > [1] Change Passcode, then use the prompts.
5 | Configure users
You can change passcodes for other users, and you can add, remove,
and replace keyfobs and cards.
5 .1 | Adding users
Use [CMD][5][6], then the prompts.
or
Use [CMD][8].
Go to [4] Users > [2] Add User.
5.2 | Edit Users
Use [CMD][8].
Go to [4] Users > [3] Edit User.
5.3 | Deleting users
Use [CMD][5][3]
or
Use [CMD][8].
Go to [4] Users > [4] Delete User.
6 | Alarms
When the security system is in alarm, the number of alarms shows on
the display.
Enter your passcode to stop the alarms. If the system is armed, stopping
the alarm also stops the system.
The system shows Alarm Silenced, and the number and names of points
in alarm, in the order they occurred. .
7 | Shortcuts
1. Use [CMD] [8].
2. Go to [6] Shortcuts.
3. To choose the shortcut, use [NEXT] and [ENTER].
8 | Keypad cleaning
Use a soft cloth or a non-abrasive cleaning solution. Spray the cleaner
onto the cloth, not the keypad.
El-gr: Μεταβείτε στη διεύθυνση https://gr.boschsecurity.com/el/ για την
τεκμηρίωση σε αυτήν τη γλώσσα.
Es-es: Visite https://es.boschsecurity.com/es/ para obtener documentación en
este idioma.
Fr-fr: Accédez à l'adresse https://fr.boschsecurity.com/fr/ pour obtenir la
documentation dans cette langue.
Hu-hu: A honosított dokumentációt lásd a https://hu.boschsecurity.com/hu/
oldalon.
It-it: Andare a https://it.boschsecurity.com/it/ per la documentazione in
questa lingua.
Pl-pl: Dokumentacja w tym języku znajduje się w witrynie https://
pl.boschsecurity.com/pl/
Pt-br: Acesse http://pt.boschsecurity.com/pt/ para obter a documentação
neste idioma.
Copyright
This document is the intellectual property of Bosch Security
Systems, Inc. and is protected by copyright. All rights reserved.
Trademarks
All hardware and software product names used in this document are
likely to be registered trademarks and must be treated accordingly.
Two-line Alphanumeric Keypad
B920/B921C
en User's Quick Reference Guide
Bosch Security Systems, Inc. Bosch Sicherheitssysteme GmbH
130 Perinton Parkway Robert-Bosch-Ring 5
Fairport, NY 14450 85630 Grasbrunn
USA Germany
www.boschsecurity.com
© 2018 Bosch Security Systems, Inc. F.01U.310.596 | 02 | 2018.05