Stopwatch; Measuring Elapsed Time; Adjusting Hand And Day Indicator Alignment; Alignment - Casio 5542 Operation Manual

Stopwatch

The stopwatch measures elapsed time in units
of one second up to 23 hours, 59 minutes, 59
seconds (24 hours).
Getting Ready
Enter the Stopwatch Mode.
Navigating Between Modes
l
30

Measuring Elapsed Time

Seconds
30
Hour (24-hour time)
Minutes
Hours
1.
Use the operations below to measure
elapsed time.
A
Start
A
Stop
A
Resume
A
Stop
2.
Press (B) to reset the elapsed time to all
zeros.
3.
Press (C) to return to the Timekeeping
Mode.
Operation Guide 5542
Adjusting Hand and
Day Indicator

Alignment

Strong magnetism or impact can cause the
hands and/or the day indicator to go out of
alignment. If this happens, adjust hand and
day indicator alignment.
The watch performs alignment of the hour
●
hand, minute hand, second hand, and 24-
hour hand automatically.
Adjusting Hand and Day
Indicator Alignment
1.
Pull out the crown to the second click.
2.
Hold down (B) for about five seconds, until
the second hand moves to 12 o'clock.
Release the button when the second hand
reaches 12 o'clock.
This will start auto alignment of the hour
hand, minute hand, second hand, and 24-
hour hand.
After auto alignment is complete, the
●
hands should be in the positions shown
below.
24-hour hand
Minute hand
3.
Press (C).
Confirm that the small hour and minute
hands, and the small 24-hour hand are all
stopped at 12 o'clock.
Small 24-hour hand
Small hour hand
Hour hand
30
Crown
Second hand
30
Small minute hand
4.
If the small hour and minute hands, and
the small 24-hour hand are not at 12
o'clock, rotate the crown to align them
correctly.
5.
Press (C).
Confirm that the mode hand is stopped at
12 o'clock, and check if the day is
indicated properly.
Mode hand
30
30
Day (Operation start day)
6.
If the mode hand and or the day indicator
is out of alignment, rotate the crown to
move the mode hand to 12 o'clock and the
day to the center of the indicator window.
The movement range of the mode hand
●
and day indicator is limited when you
rotate the crown. The maximum left-
right movement of the mode hand is 180
degrees in either direction. The day
indicator moves only slightly.
After the mode hand and day indicator
●
are in the positions you want, advance
to step 9 of this procedure. If you are
unable to make the adjustments you
want, go to step 7.
7.
Press (C).
Confirm that the day indicator shows 1.
1
1
Day
Changing the date setting will cause the
●
mode hand to rotate repeatedly. In
some cases, the mode hand may
continue to rotate for about 5 minutes.
Hand and Day Indicator Movement
l
8.
If 1 is not shown for the day, rotate the
crown until 1 is shown for the day.
The mode hand moves in conjunction
●
with crown rotation. Move the mode
hand to 12 o'clock.
9.
Push the crown back in.
14