Important Notes On Shutdown/Return To Service; Environmental Protection, Waste Disposal - Lamtec LT2 User Manual

2 Safety
2.6

Important Notes on Shutdown/Return to Service

The Lambda Transmitter and the Lambda Probe form a high quality electronic system. Treat
them with care at all times, including during shut-down, transport and storage.
Shut-down
Do not switch the Lambda Transmitter off as long as the Lambda Probe is mounted; including
when the relevant facility has been shut down. Residual gases cause corrosion and may dam-
age system parts.
 Do not store the instruments outdoors without protection!
 When dismantling, protect cable ends and plugs against corrosion and dirt. Corroded
 If possible, transport in the original packaging.
Danger of burns!
Probe becomes hot during operation.
If the probe is operated when removed, there is a danger of burns on the probe housing.
 Never lay the probe on flammable material and heat it up.
 Wear protective gloves
Return to service
According to chapter 6 Commissioning/Decommissioning.
2.7

Environmental Protection, Waste Disposal

The design of Lambda Transmitter and LS2 is also based on environmental considerations.
The modules can easily be separated and sorted into distinct types, and recycled accordingly.
NOTICE
Always store in a dry place, if possible in the original packaging.
plugs may cause malfunction.
WARNING!
9