Alert Summary Table - Philips DreamStation BiPAP autoSV User Manual

3.9 Alert summary table

The following table summarizes the alerts. See Alarm and alert LED indicators and Alarm and alert audible
indicators earlier in this chapter for LED and audible indicators for each alert type. The screen below is an
example of an alert screen. The icons shown in the table below appear on the top of each alert screen.
Alert
Data Activity: Do
not remove SD
card.
Change Accepted
Oximetry: Good
Connection
(icon only)
Pair?: 123456
Yes/No
Icon Priority
Status
Status
Status
Status
DreamStation BiPAP autoSV User Manual
Description
SD card read/write
underway.
Confirms acceptance of
prescription change or
device upgrade.
Displays on the therapy
screen when the blower is
on and 3 seconds of good
connection is detected.
Appears at the beginning
of therapy. This screen will
not display again if the
oximetry sensor is removed
and reapplied unless
therapy is stopped and
restarted.
Prompts to accept or
decline pairing to a
Bluetooth compatible
device. This device can
be identified by the digits
displayed.
Alarms, alerts, and troubleshooting
User action
No action needed.
No action needed.
No action needed.
Rotate the control dial to
accept pairing (Yes), or
decline (No), then press
the control dial to confirm
selection.
37