Table of Contents
Advertisement
Fig 8 Plunge Cutting
15) DUST EXTRACTION
WARNING: ALWAYS unplug Multi Saw before making any adjustments or attaching
accessories.
1) Your Multi Saw includes a vac hose adapter tube that attaches to the built-in dust
extraction port on the Multi Saw.
2) This adapter tube can be attached to a wet/dry vac hose.
3) This will help remove dust, chips and cutting debris away from the cutting area.
16) MAINTENANCE
WARNING: ALWAYS wear safety goggles or safety glasses with side shields during
power tool operations, or when blowing dust. If operation is dusty, also wear a dust
mask.
WARNING: DO NOT at any time allow brake fluids, petroleum-based products,
penetrating oils, etc to come in contact with plastic parts. Chemicals can damage,
weaken or destroy plastic, which may result in serious personal injury.
WARNING: For your safety, ALWAYS unplug from the power source before
performing any maintenance or cleaning.
1) When work has been completed, it is recommended to clean the Multi Saw.
2) Use a clean damp cloth to wipe the tool.
3) After each use it is recommended to remove dust and debris from the blade area using
compressed air or a brush.
4) Check the condition of all electrical cables.
5) Keep the motor air openings free from oil, grease and sawdust or wood chips.
6) Store tool in a dry place.
7) Check that all moving parts are well lubricated, particularly after lengthy exposure to damp
and/or dirty conditions.
11
Tel: 01335 347300
Advertisement
Table of Contents
