Table of Contents
Advertisement
2
Getting Started
Read the sections on Safety (Sections 3 and 4) and Specifications (Appendix A) and check the
VTR1 fulfils your requirements. See the back cover for other Gardasoft Vision strobe lights.
Mount the VTR1 as described in Section 4. Connect the VTR1 up to a supply as described in
Connections (Section 5). Set up the VTR1 for the desired operation as described in Configuration
Commands (Section 9).
Visit www.gardasoft.com for application notes on this product. There is also a Support page
which has information on troubleshooting problems.
2.1
Summary of Features
Throughout this manual, references to the VTR1 refer to all variants in the VTR1 range unless
otherwise stated. The convention for the part number is:
VTR1-mm-www-aa-ccc
where:
mm
M for master only, MS for master/slave pair
www
Wavelength of light in nanometres: 740, 850, 940, W (white)
aa
Beam angle in degrees: 12 or 30
ccc
Communications: ETH, RS232
3
Advertisement
Table of Contents
