LIGHT ON/OFF
TIME SETTING
CARE AND CLEANING
General
Regular maintenance is required to
ensure that the cooker hood functions
properly. This is espe-cially true of the
grease and charcoal filters.
Clean the fan and other surfaces of the
cooker hood regularly with a cloth dipped
in denatured alcohol or a non-abrasive
liquid cleaner.
The charcoal filter cleans the circulating
air in the room. Such filters cannot be
cleaned or recycled and must be replaced
at least every four months. The speed at
which the charcoal filter becomes
saturated depends on how often the fan
is used, the type of food that is cooked
and how often the grease filter is cleaned.
To prevent the risk of fire and to ensure
that the cooker hood functions properly,
the grease filter must always be cleaned
as instructed below when the display
indicates the need or at least every two
months.
*There is a fire risk if cleaning is not
carried out in accordance with the
instructions.
Cleaning the grease filter
Remove the flter from the cooker hood
and clean it in a solution of water and
neutral cleaning liquid. Leave the flter to
soak in the solution for a while.
- Rinse thoroughly with hot water and
leave the filter to dry.
- The filter can also be cleaned in a
dishwasher. The color of the grease filter
may change after a few washes. This is
LCD SCREEN
SET INCREASE
TIMER DELAY OFF
MOTOR ON/OFF
SET DECREASE
Replacing
l
filter (standard hood)
Replace the charcoal filter (standard
hood) as follows:
Remove the grease filter.
Squeeze the clips on the charcoal
filter a pull the charcoal filter back to
remove it.
l Replacing the charcoal filter (for
hood with sloping surface)
1. Press the middle of the right edge
of the glass cover to open it
2. Remove the grease filter
the
charcoal