Table of Contents
Advertisement
Leveling Device
When mounting hood on the wall,the level can be adjusted by turning the two screws
on the motor housing.
INSTALLATION ALTERNATIVES
The cooker hood can be installed in the following ways:
Circulating indoor air (A)
Outdoor venting (B)
REMEMBER!
l
The distance between the top of the hob and the lowest part of the
cooker hood must be at least 60cm.
lIf a two-part connection tube is used, the lower section must sit outside
the upper sec-tion.
lDo not connect the cooker hood exhaust to a duct used to circulate hot air
or vent steam from another appliance.
lAlways use protective gloves when installing the appliance!
Advertisement
Table of Contents
