Motorola CD2HD Manual

What's in the box
Motorola CD2HD
HD Voice Cordless
Handset for Routers
CD2HD
handset
Getting started
The CD2HD handset is designed to be used with a CAT-iq 2.0
base station or router. If registered to a GAP or CAT-iq 1.0 base
you will be able to make and receive external calls and have
access to the local contacts.
HD Voice technology has revolutionised the telephone industry.
Callers can now feel better connected. The rich quality of HD
Voice calls is more effective and offers a superior listening
experience.
Compatible After a few quick steps you can be making and receiving calls
with CAT-iq
on your CD2HD handset. Please ensure that your router has the
Routers
latest software update installed before registering a new handset.
Registering a handset to a FRITZ!Box requires FritzOS 6.80 or
later installed on the FRITZ!Box before registering the handset.
Refer to the router or FRITZ!Box manual for details of how to
perform a check and install the latest software if required.
Plug in the router
Make sure the router is
plugged into the power and
working correctly.
A new dimension in voice
Extended Quick Start Guide
2
Insert the batteries
Remove the battery cover from
the back of the handset and
insert the rechargeable Ni-MH
battery cells supplied. Please
note the '+' and '-' markings
Batteries
inside the battery compartment
and insert in the correct direction.
Slide the battery cover back
into place.
Extended Mains power
CD2HD Quick Start adaptor for
Important
charger Guide the charger
Warning! Use only the approved rechargeable Ni-MH battery cells
(2 x AAA Ni-MH 750mAh rechargeable batteries) supplied with
your CD2HD.
Connecting and charging the handset
Plug the power adaptor into
the socket marked on the
rear of the charger and plug
the other end into the mains
power wall socket. Switch on
the mains power.
We recommend leaving the
handset to charge for 30
minutes before proceeding to
the next step.
To fully charge the batteries,
place the handset on the
charger to charge for at least
16 hours continuously.
Battery low warning
If you hear a warning beep every 60 seconds during a call, you
will need to recharge the handset before you can use it again.
When charging, will scroll on the display.
Select the required language
Once the battery is charged
the list of available languages
is displayed.
1
u d
Scroll / to the required
Press down
language and press Select to
2 save.
Slide
Registering the handset
The routers registration
process is dependent on the
router, follow the registration
instructions given in your
routers user guide.
Hold your CD2HD handset
within 5m of the router.
Press Register. The screen
displays Registering. Once
successful Registered will be
displayed and the handset
will beep and the standby
screen will be displayed.
Overview of the handset Overview of the standby screen
Status bar
Ring
Indicator
LED
Left soft key
information
Display
Navigating the menu
Right softkey
From the standby screen, press Menu.
Left softkey
Clear
The main menu is opened and the display will show the main
Menu
Back
menu icons.
OK
Intercom
Use the u
Scroll left Left softkey - press to action the corresponding word prompt
shown in the lower left corner of the display.
Contacts
Scroll up
Right softkey - press to action the corresponding word prompt in
Recall key
Volume up
the lower right corner of the display.
Press O to return to standby.
Talk
Scroll right
Hands-free
Redial Status bar icons
Signal icon
Scroll down
Volume down
Displays when in
Call list
End call hands-free mode
Power on/o
Mute is activated
Exit
Speed dial keys
Ringer is switched off
*
#
Change case
Keypad lock
Temporarily
Main menu icons
change from
pulse to tone Contacts
Space
dialling
Pause
Call List
Ringer o
Microphone
Clock & Alarm
Handset
name
Date and
time
Right soft key
information
(t) / r (u) keys to scroll through the menu.
B
/ d /
Indicates a missed call
Alarm is set
Battery indicator
Call Settings
Handset Settings
Advance Settings