Installation; Preparing For Installation - ABB MTAC-01 User Manual

Installation

Preparing for installation

MTAC-01 module
The MTAC-01 Pulse Encoder Interface module is an interface for
connecting a digital pulse encoder to an ACS350 drive. A pulse
encoder should be used if accurate speed or position (angle)
feedback from the motor shaft is required.
Module layout
Compatibility
The MTAC-01 module is compatible with all ACS350 drives. To
confirm compatibility with a particular pulse encoder, compare the
pulse encoder requirements to
SCR
V
in
V
out
GND
A
B
Z
Specifications on page 25.
9
Installation