Bulk Dump Temp; Bulk Dump All - Roland V-Combo VR-760 Owner's Manual

Bulk Dump Temp

Transmit the contents of the selected Registration.
1.
Hold down the [EDIT] button, and press the
REGISTRATION [7] (UTILITY) button.
The Edit's "UTILITY" screen is displayed.
2.
Press CURSOR [ ] button to display the
following screen.
fig.06-04(BulkDumpTemp)
Pressing the [EXIT] button, return to the basic screen.
3.
Start recording on your sequencer.
4.
Press the [ENTER] button to begin saving the
settings.
While the settings are being saved, sending message is
displayed.
When the save has been completed,
indicating that it is completed appears in the
display
, and return to the basic screen.
5.
Stop recording on your sequencer.
Detailed Settings for Each Function (EDIT)

Bulk Dump All

This send all settings.
1.
2.
fig.06-05(BulkDumpAll)
3.
4.
fig.06-06(Sending)
a message
5.
6.
fig.06-07(Aborted!)
Hold down the [EDIT] button, and press the
REGISTRATION [7] (UTILITY) button.
The Edit's "UTILITY" screen is displayed.
Press CURSOR [ ] button to display the
following screen.
Pressing the [EXIT] button, return to the basic screen.
Start recording on your sequencer.
Press the [ENTER] button.
A screen like the one shown below appears, and saving
the settings is beginning.
After a short while, when transmission is finished,
message indicating that it is completed appears
the basic screen returns to the display.
Stop recording on your sequencer.
If you press [EXIT] button while transmission is
still in progress, the following message appears,
and the basic screen returns to the display.
a
and
77