Changing The Overall Tone Quality (Master Eq); Using The Controller; Bender/Modulation Lever - Roland V-Combo VR-760 Owner's Manual

Changing the Overall Tone Quality
(MASTER EQ)
fig.04-06(EQ)
MASTER EQ is equalization that is applied to all of the parts. You can alter
the tonal coloration by adjusting the [LOW], [MIDDLE], and [HIGH] knobs.
MIDDLE comprises FREQ and LEVEL settings, which allow you to change
the degree of change in the midrange as well as the center frequency of the
frequencies being changed.

Using the Controller

You can use the various controls to add expression to your performances.

Bender/Modulation Lever

While playing the keyboard, move the lever to the left to lower the pitch, or
to the right to raise the pitch. This is known as Pitch Bend.
You can also apply vibrato by manipulating the lever away from you. This
is known as Modulation.
You can set the range of Pitch Bend (p. 70)
fig.04-07(BenderLever)
Pitch Bend
*
The modulation effect obtained when you move the lever may differ according to the tone
being used. Additionally, the effect applied by moving the lever is predetermined for each
tone, and cannot be changed.
* The modulation effect is not applied to the Organ part.
Performing with the Keyboard
Modulation
NOTE
MASTER EQ settings
cannot be stored in the
registrations or on
CompactFlash cards. The
settings are always as they
appear on the panel.
You can also make settings
that permit you to change
the organ's rotary speed
with the bender lever (p.
70).
31