Disassembly and Reassembly
No.
Part name
^
Blower
Propeller Fan
&
Motor Supporter &
*
Motor
4-12
Procedures
1. Loosen the nut-washer, and remove the
blower.
1. Remove two screws on the bottom side,
and 5 screws on the case cond.
2. Loosen the hexagon nut, and remove the
fan.
1. Remove four hexagon nuts on the base
pan and partition.
2. Move the motor - assembly toward the
condenser, and lift up the motor - assembly
from the frame.
3. Remove four hexagon nuts on the
supporter-motor.
Remarks
Samsung Electronics