Samsung AZ09AATEA Service Manual page 24

No. Part name
$
Ass'y control
%
PLATE EVAP
CASING
&
TRAY DRAIN
^
Case Cond
&
Propeller Fan
Samsung Electronics
Procedures
1. Remove the blade V(and arm blade).
2. Remove 4 screws on the FRAME BLADE.
3. Remove the FRAME BLADE.
4. Remove 2 screws under the BASE PAN,
and earth wire screw.
5. Remove two lead wire assemblies.
6. Take out the control box forward.
1. Remove 2 srews on the front side.
2. Remove 3 screws on the left side.
3. Remove 1 screw from the Base pan.
4. Pull up the PLATE EVAP CASING and
TRAY DRAIN.
1. Remove 2 screws on the rear side (Base
pan), and 7 screws on the case cond.
2. Pull up the CONDENSER from the Base
pan.
3. Remove the Nut, and remove the
propeller fan.
4. Remove the Nut, and remove the
BLOWER.
Disassembly and Reassembly
Remarks
4-7