Samsung AZ09AATEA Service Manual page 21

Disassembly and Reassembly
No. Part name
$
Ass'y Control
%
PLATE EVAP
CASING
&
TRAY DRAIN
^
Blower
&
Propeller Fan
4-4
Procedures
1. Remove the blade V(and arm blade).
2. Remove 3 screws on the FRAME
BLADE.
3. Remove the FRAME BLADE.
4. Remove 1 screw under the Base pan,
and earth wire screw.
5. Remove two lead wire assemblies.
6. Take out the control box forward.
1. Remove 2 screws on the front side.
2. Remove 4 screws on the left side.
3. Pull up the PLATE EVAP CASING and
TRAY DRAIN.
1. Remove 2 screws on the rear side (Base
pan), and 7 screws on the case cond.
2. Pull up the CONDENSER from the
Base pan.
3. Remove the nut, and remove the
propeller fan.
4. Remove the nut, and remove the
BLOWER.
Remarks
Samsung Electronics