Kenwood NX-5900 Service Manual page 50

Item Condition
Panel tuning
mode
3. 1) Adj item:
High [An MAX_H]
Maxi- Adjust:[****]
mum 2) Adj item:
Power [700M RX/TA
Low]→
[700M RX/TA
High]→
[700M TX Low]→
[700M TX
High]→
[800M TX Low]→
[800M TX
High]→
[800M RX/TA
Low]→
[800M RX/TA
High]
PTT : ON
Press [ ] key to
store the adjust-
ment value.
4. 1) Adj item:
Medium [An MAX_M]
Maxi- Adjust:[****]
mum 2) Adj item:
power [700M RX/TA
Low]→
[700M RX/TA
High]→
[700M TX Low]→
[700M TX
High]→
[800M TX Low]→
[800M TX
High]→
[800M RX/TA
Low]→
[800M RX/TA
High]
PTT : ON
Press [ ] key to
store the adjust-
ment value.
1-50 (No.RA032<Rev.001>)
Measurement
PC test mode Test-
equip-
ment
1) Adj item: Power
[High Maximum meter
Power] Ammeter
2) Adj item:
[Frequency:
700MHz Band]
[RX/TA Low]→
[RX/TA High]→
[TX Low]→
[TX High]
[Frequency:
800MHz Band]
[TX Low]→
[TX High]→
[RX/TA Low]→
[RX/TA High]
Press [Transmit]
button.
Press [Apply All]
button to store the
adjustment value.
1) Adj item: Power
[Medium Maximum meter
Power] Ammeter
2) Adj item:
[Frequency:
700MHz Band]
[RX/TA Low]→
[RX/TA High]→
[TX Low]→
[TX High]
[Frequency:
800MHz Band]
[TX Low]→
[TX High]→
[RX/TA Low]→
[RX/TA High]
Press [Transmit]
button.
Press [Apply All]
button to store the
adjustment value.
Unit Ter- Unit Parts
minal
Panel ANT Panel [Panel
tuning
mode]
[ ],
[ ]
[PC
test
mode]
[←],
[→]
Panel ANT Panel [Panel
tuning
mode]
[ ],
[ ]
[PC
test
mode]
[←],
[→]
Adjustment
Method
45W (700M RX/TA Low, ±1.0W
700M RX/TA High, 15.0A or less
700M TX Low,
[PC test
700M TX High,
mode]
800M TX Low,
Press [Apply
800M TX High)
All] button to
40W (800M RX/TA Low,
store the
800M RX/TA High)
adjustment
value after all
adjustment
point was
adjusted.
45W (700M RX/TA Low, ±1.0W
700M RX/TA High, 15.0A or less
700M TX Low, [PC test
700M TX High, mode]
800M TX Low, Press [Apply
800M TX High) All] button to
40W (800M RX/TA Low, store the
800M RX/TA High) adjustment
value after all
adjustment
point was
adjusted.
Specifica-
tions
/Remarks