Dell Emc Diagnostics; Onie Expansion; S4048-On Or S3048-On Diagnostic Package - Dell S6000–ON Troubleshooting Manual

The following describes the Dell EMC diagnostics. These instructions apply to systems for which the ONIE diagnostics are not available.

ONIE expansion

To view all the ONIE commands available, from the ONIE prompt, enter onie- and click <tab> twice.
ONIE:/ # onie- <TAB><TAB>
onie-boot-mode
onie-console
onie-discovery-start
onie-discovery-stop
Topics:
• S4048–ON or S3048–ON diagnostic package
• S6000–ON, S4048–ON, or S3048–ON system information
• CPLD versions
• S6000–ON, S4048–ON, or S3048–ON factory defaults restore
S4048–ON or S3048–ON diagnostic package
To install the S4048–ON or S3048–ON diagnostic package on your system, follow these steps.
NOTE: Before you begin, go to
support access account to download the package.
1 Boot your system to ONIE.
2 Enter the onie-discovery-stop command to stop the ONIE discovery mode (ONIE:/ # onie-discovery-stop).
3 Configure the management interface to download the image using ONIE:/ # ifconfig eth0 xx.xx.xx.xx/xx up. Also
ping the server/network IP address.
ONIE:/ # ifconfig eth0 xx.xx.xx.xx/xx up
ONIE:/ # ping -c4 xx.xx.xx.xx
PING xx.xx.xx.xx (xx.xx.xx.xx): 56 data bytes
64 bytes from xx.xx.xx.xx: seq=0 ttl=64 time=0.446 ms
64 bytes from xx.xx.xx.xx: seq=1 ttl=64 time=0.198 ms
64 bytes from xx.xx.xx.xx: seq=2 ttl=64 time=0.183 ms
64 bytes from xx.xx.xx.xx: seq=3 ttl=64 time=0.163 ms
--- xx.xx.xx.xx ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 0.163/0.247/0.446 ms
ONIE:/ #
4 Install the image using the onie-nos-install command.
ONIE:/ # onie-nos-install tftp://xx.xx.xx.xx/INSTALLER-DND-SK-x.x.x.xx.bin
Stopping: discover... done.
ONIE: Executing installer: ./INSTALLER-DND-SK-x.x.x.x.BIN ...
INSTALLER-DND-SK-1.0
INSTALLER-DND-SK-1.0
onie-fwpkg
onie-nos-install
onie-self-update
onie-support
http://www.dell.com/support
3% |*
12% |***

Dell EMC diagnostics

onie-syseeprom
onie-sysinfo
onie-uninstaller
and download the diagnostic package. You will need your Dell EMC
|
| 3477k
878k 0:00:29 ETA
0:00:13 ETA
Dell EMC diagnostics
3
21