Connect To The Appliance - Cisco M170 Quick Start Manual

• IP Address: 192.168.42.43
• Subnet Mask: 255.255.255.0
• Router: 192.168.42.1
Click OK.
Step 6
8

Connect to the Appliance

The Cisco M170 appliance has two gigabit network ports:
P1 and P2.
For the purposes of setup, connect to P1 as your management
interface and configure incoming web traffic or email on the P2
interface. These settings can be changed after the initial
installation.
P1:
Management: 192.168.42.42
Connect the P1 port
to your computer using
an Ethernet cable.
CONSOLE P1 P2
P1 P2
P2:
Incoming web traffic or email
Connect the P2 port
to your network using
an Ethernet cable.
7JZ78-004E
9