Table of Contents
Advertisement
15
Frequently Asked Questions
Q. How do I delete older Configuration Masters on my
Cisco M170 Content Security Management Appliance?
A. Go to the Web > Utilities > Security Services Display page,
and click Edit Settings. At the top of each Configuration
Master you can uncheck the corresponding Configuration
Master checkbox. Click Submit and that Configuration
Master no longer shows up as a Configuration tab on the
GUI.
Q. How do I add an appliance to my Cisco M170 Content
Security Management Appliance?
A. After you have enabled monitoring services on the
Cisco M170 appliance, you can add connection
information for the appliances that it manages. You can
connect any Cisco Email Security appliance using AsyncOS
6.0 or later, and any Cisco Web Security appliance running
AsyncOS 5.7, 6.3, or 7.1 or later.
a. On the Cisco M170 Content Security Management
Appliance, choose Management Appliance >
Centralized Services > Security Appliances.
b. Click Add Email Appliance to display the Add Email
Security Appliance page or click Add Web Appliance to
display the Add Web Security Appliance page.
c. In the Appliance Name and IP Address text fields, type
the appliance name and the IP address for the
Management interface of the Cisco appliance.
d. Select the services that you want to use when managing
the Cisco appliance.
e. Click Establish Connection.
f. Click Test Connection to verify that the monitoring
services on the remote appliance have been correctly
configured and are compatible.
g. If you are adding a Web Security appliance, choose the
Configuration Master to which you want to assign the
appliance.
h. Click Submit to submit your changes on the page, then
click Commit Changes to commit your changes.
17
Advertisement
Table of Contents
