Connect to the Appliance
The Cisco M190 appliance has two gigabit network ports:
Data 1 and Data 2.
For the purposes of setup, connect to Data 1 as your management interface and
configure incoming web traffic or email on the Data 2 interface. These settings
can be changed after the initial installation.
Item
Port
1
Remote
Power Cycle
2
Console
3
Data 1
4
Data 2
Description
The port that is used for Remote
Power Cycle (RPC).
The console port that directly
connects a computer to the
appliance.
A Gigabit Ethernet customer data
interface. This port is used as a
management interface.
A Gigabit Ethernet customer data
interface.
7