Viessmann VITODENS 200-W Installation And Service Instructions Manual page 2

Type b2hb, b2kb, 1.8 to 35 kw wall mounted gas condensing boiler with vitotronic 200, weather-compensated natural gas and lpg version
Table of Contents

Advertisement

Safety instructions
Safety instructions
Please follow these safety instructions closely to
prevent accidents and material losses.
Safety instructions explained
Danger
This symbol warns against the risk of injury.
!
Please note
This symbol warns against the risk of material
losses and environmental pollution.
Target group
These instructions are exclusively intended for quali-
fied contractors.
Regulations to be observed
National installation regulations
Statutory regulations for the prevention of accidents
Statutory regulations for environmental protection
Codes of practice of the relevant trade associations
All current safety regulations as defined by DIN, EN,
DVGW, TRGI, TRF, VDE and all locally applicable
standards
ÖNORM, EN, ÖVGW G K directives,
a
ÖVGW-TRF and ÖVE
SEV, SUVA, SVGW, SVTI, SWKI, VKF and
c
EKAS guideline 1942: LPG, part 2
Safety instructions for working on the system
Working on the system
Where gas is used as the fuel, close the main gas
shut-off valve and safeguard it against unintentional
reopening.
Isolate the system from the power supply, e.g. by
removing the separate fuse or by means of a mains
isolator, and check that it is no longer live.
Safeguard the system against reconnection.
Wear suitable personal protective equipment when
carrying out any work.
Danger
Hot surfaces can cause burns.
Before maintenance and service work, switch
OFF the appliance and let it cool down.
Never touch hot surfaces on the boiler, burner,
flue system or pipework.
2
Note
Details identified by the word "Note" contain additional
information.
Work on gas installations may only be carried out by
a registered gas fitter.
Work on electrical equipment may only be carried
out by a qualified electrician.
The system must be commissioned by the system
installer or a qualified person authorised by the
installer.
!
Please note
Electronic assemblies can be damaged by elec-
trostatic discharge.
Prior to commencing work, touch earthed
objects such as heating or water pipes to dis-
charge static loads.
Repair work
!
Please note
Repairing components that fulfil a safety func-
tion can compromise the safe operation of the
system.
Replace faulty components only with genuine
Viessmann spare parts.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents