Setting The Scale Of The Volume Display; Setting The Dynamic Range Adjustment Method; Setting The Limit Value Of The Volume; Setting The Initial Volume For When The Unit Is Turned On - Yamaha RX-V385 Owner's Manual

Setting the scale of the volume display

Switches the scale of the volume display.
Setup menu
"Sound" > "Volume" > "Scale"
Settings
dB Displays the volume in the "dB" unit.
0-97 Displays the volume in the numeric value (0.5 to 97.0).

Setting the dynamic range adjustment method

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and
DTS signals) playback.
Setup menu
"Sound" > "Volume" > "Dynamic Range"
Settings
Maximum Produces audio without adjusting the dynamic range.
Standard Optimizes the dynamic range for regular home use.
Sets the dynamic range for clear sound even at night or at low volumes.
Min/Auto
When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.

Setting the limit value of the volume

Sets the limit value of the volume adjusted by using such as VOLUME keys on the
remote control.
Setup menu
"Sound" > "Volume" > "Max Volume"
Setting range
-60.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB [20.0 to 95.0 (5.0 increments),
97.0]
Setting the initial volume for when the unit is turned
on
Sets the initial volume when the unit is turned on.
Setup menu
"Sound" > "Volume" > "Initial Volume"
Settings
Sets the level to the volume level of the unit when it last entered standby
Off
mode.
Mute Sets the unit to mute the audio output.
-80.0 dB to +16.5 dB
(0.5 dB increments)
Sets the level to the specified volume level.
[0.5 to 97.0
(0.5 increments)]
Note
This setting works only when the volume level is set lower than "Max Volume". For details on "Max Volume" in
the "Setup" menu, see the following:
▪ "Setting the limit value of the volume" (p.77)
77
En