Configuring The Speaker Settings; Setting Your Speaker System; Setting The Use Of A Subwoofer; Setting The Size Of The Front Speakers - Yamaha RX-V385 Owner's Manual

Configuring the speaker settings

Setting your speaker system

Select the setting according to the speakers that are connected.
Setup menu
"Speaker" > "Configuration" > "Power Amp Assign"
Settings
Select this option when you use a normal speaker system (not using a bi-
Surround
amp connections).
Select this option when you connect front speakers that support bi-amp
BI-AMP
connections.
Note
For details on the speaker system, see the following:
▪ "Speaker systems and speakers to be connected" (p.14)
▪ "Connecting front speakers that support bi-amp connections" (p.20)

Setting the use of a subwoofer

Selects the setting according to the use of your subwoofer.
Setup menu
"Speaker" > "Configuration" > "Subwoofer"
Settings
Select this option when a subwoofer is connected.
Use
The subwoofer will produce LFE (low-frequency effect) channel audio and
low-frequency components from other channels.
Select this option when no subwoofer is connected.
None
The front speakers will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.

Setting the size of the front speakers

Selects the setting according to the size of your front speakers.
Setup menu
"Speaker" > "Configuration" > "Front"
Settings
Select this option for small speakers.
Small
The subwoofer will produce front channel low-frequency components
(configurable in "Crossover").
Select this option for large speakers.
Large
The front speakers will produce all of the front channel frequency
components.
Note
▪ When configuring the speaker size, as a general guideline, select "Large" if the woofer diameter of your
speaker is 16 cm (6‑1/4") or larger, or "Small" if it is smaller than 16 cm (6‑1/4").
▪ "Front" is automatically set to "Large" when "Subwoofer" is set to "None". For details on "Subwoofer" in the
"Setup" menu, see the following:
– "Setting the use of a subwoofer" (p.67)
67
En