Adjusting The Perceived Height Of Dialogue Sound; Setting The Scale Of The Volume Display; Setting The Dynamic Range Adjustment Method - Yamaha HTR-6072 Owner's Manual

Adjusting the perceived height of dialogue sound

Adjusts the perceived height of dialogue sounds when the position (height) of dialogue
sound is artificial. If the dialogue sounds as if it is coming from below the screen, you
can raise its perceived height by increasing this setting.
Note
This setting is available only when one of the following conditions is met.
▪ One of the sound programs (except for 2ch Stereo and 7ch Stereo) is selected when presence speakers
are used.
▪ Virtual Presence Speaker (VPS) is working.
(You may hear dialogue sounds from the surround speakers depending on the listening position.)
Setup menu
"Sound" > "Dialogue" > "Dialogue Lift"
Setting range
0 to 5 (The bigger the value the higher the position)
Ideal position

Setting the scale of the volume display

Switches the scale of the volume display.
Setup menu
"Sound" > "Volume" > "Scale"
Settings
dB Displays the volume in the "dB" unit.
0-97 Displays the volume in the numeric value (0.5 to 97.0).

Setting the dynamic range adjustment method

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and
DTS signals) playback.
Setup menu
"Sound" > "Volume" > "Dynamic Range"
Settings
Maximum Produces audio without adjusting the dynamic range.
Standard Optimizes the dynamic range for regular home use.
Sets the dynamic range for clear sound even at night or at low volumes.
Min/Auto
When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.
93
En