Speaker Systems And Speakers To Be Connected; Speaker Requirements - Yamaha RX-V385 Owner's Manual

Speaker systems and speakers to be connected

Select the speaker layout for the number of speakers that you are using and place the
speakers and subwoofer in your room.
Speaker type
Front (L/R) 1/2
Center 3
Surround (L/R) 4/5
Subwoofer 9
Speaker system
(the number of channels)
5.1 3.1
 
 

 

Speaker requirements

Speakers and subwoofers to be connected to the unit must meet the following
requirements:
• (U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When
connecting 6-ohm speakers, set the unit's speaker impedance to "6 Ω MIN". For
2.1
details, see the following:

– "Setting the speaker impedance" (p.15)
• (Except for U.S.A. and Canada models)
Use speakers with an impedance of at least 6 W.

• Use a subwoofer with built-in amplifier.
Note
▪ Prepare the number of speakers according to your speaker system.
▪ Be sure to connect the front left and right speakers.
14
En