Warning Messages From Ypao - Yamaha RX-V385 Owner's Manual

Warning messages from YPAO

If a warning message is displayed after the measurement, you can still apply the
measurement results by following on-screen instructions.
However, we recommend you perform YPAO again in order to use the unit with the
optimal speaker settings.
Warning message
TV screen
Problem speaker (blinks)
LINK MASTER STEREO TUNED ZONE
SLEEP PARTY 2 A
OUT 2 Hi -R es ENHANCER YPAO VOL. A- DRC
ECO
W-1:PHASE
Front display
3 B
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR
Warning message Cause
A speaker cable may be
W-1:Out of Phase
connected with the reverse
(W-1:PHASE)
polarity (+/-).
A speaker is placed more
W-2:Over Distance
than 24 m (80 ft) from the
(W-2:DISTANCE)
listening position.
There are significant volume
W-3:Level Error
differences between the
(W-3:LEVEL)
speakers.
Note
Text in parentheses denotes indicators on the front display.
30
En
Remedy
Check the cable connections (+/-) of the
problem speaker.
If the speaker is connected incorrectly:
Turn off the unit, reconnect the speaker
cable.
If the speaker is connected correctly:
Depending on the type of speakers or
room environment, this message may
appear even if the speakers are
connected correctly. In this case, you
can ignore the message.
Exit YPAO, turn off the unit, and place the
problem speaker within 24 m (80 ft) of the
listening position.
Check the usage environment and cable
connections (+/-) of each speaker, and
the volume of the subwoofer. If there is
any problem, exit YPAO, turn off the unit,
and then reconnect speaker cable or
correct the speaker positions. We
recommend using the same speakers or
speakers with specifications that are as
similar as possible.