6.1.3 Firmware Check
The Firmware Check screen of the Startup Wizard will automatically check for updated firmware for your NVR.
NOTE:
If your NVR does not have a network connection, the firmware will not update.
If a firmware upgrade is detected, the startup wizard will display the screen below. Please select "Upgrade"
to download and install the new upgrade to your system.
Once prompted, the NVR will begin updating and when complete the NVR will restart automatically. This
process could take up to 10 minutes, please be patient.
NOTE:
Do NOT turn off your NVR or disconnect it from the Internet while the system is upgrading.
26